ABSTRACT

          This study was embarked upon to ascertain problems  of working capital management in the manufacturing industries in Nigeria. The study has a total  of three chapter and first chapter titled the introduction started with preamble.

          The aims and objective of the study were duly light lighted in chapter one. The  objectives  of the study includes; to discuss how working capital are managed, t o discuss  the problems of working capital  management in the  manufacturing industries in Nigeria, it is likely to inform us of the avoidance of indebtedness in working capital management with the use  of determinant of adequate amount of working capital. And finally, to make recommendation on ways of strengthening the positive contributions  of manufacturing industrial sector to  the national economy.

          The more manufacturing industries management  working capital, the greater the tendency to reduce indebtedness.

          Also the significance of the study which include both the theoretical  and piratical significance explained.

Chapter two included the literature review. Here the earlier works of erudite scholars, theories and analysts and its relevance to the study were analyzed.

          Chapter three s where  the finding of the research were light lighted which included, that heavy working capital should  be invested in raw material for a firm  to continue in production. Indispensably, manufacturing industries should maintain good working capital cycle,  because it gives an in sight into the amount of cash investment required to finance current assets.

          I equally recommended that the study should  undertaken further and  that working capital  management should be the basis of granting loan to  any manufacturing industry if profitable investment is to be made. I also recommended and verified before credit for than is granted. I finally concluded the chapters and  the project by admonishing on the importance of utilizing the finding of the research.

TABLE OF CONTENTS

Title Page

Approval Page

Dedication

Acknowledgement

Abstract

Table of Content 

CHAPTER ONE

1.0 Introduction

1.1 Background of the study

1.2 statement of problem

1.3 objective of the study

1.4 significant of the study  

1.5 scope  and limitations of the study

1.6 Definition of terms

CHAPTER TWO

2.0 Literature review

2.1 Working capital management (introduction)

2.2 components of working capital management

2.3 Classification of  working capital

2.4 working capital cycle

2.5 Effects of inadequate working capital

2.6 Effects of excess working capital

2.7 Determination of adequate amount of working capital

2.8 Factors affecting  the amount of investment

2.9 Sources  of business finance

CHAPTER THREE

3.0 Summary of findings, recommendation and conclusion

3.1 Findings

3.2 Recommendation

3.3 Conclusion

  Bibliography CHAPTER ONE

1.0 INTRODUCTION

1.1 BACKGROUND OF THE STUDY

          The term working capital originated with the old iankee peddlers, who would load up his wagon with goods and then go off on his route t o peddle his wares.  The merchandise was called working capital because it was what he actually sold, or turn over” to produce his projects. He generally owned  the rvagon around horse, so that they were financed with ‘equity’ capital, but he borrowed  the funds to buy the merchandise these borrowings were working capital loans, and they had to be repaid after each trip  to demonstrate to the bank that the credit was sound. If the peddler was able to repay the loan, then the bank would make another loan.

          From this, working capital is conceptualized as  the provision of sufficient current assets that will be able to sustain the normal process of acquisition of raw materials and supplies, turning out the finished product and collection of payments.

          Working capital management deals with the determination of the ratios at which to hold the current assets  and current liabilities in the overall valuation of the firun. Working capital broadly refers to current assets and current liabilities. Net working capital is the deduction of current liabilities from  the current assets.

          Therefore, working capital is one of the most strategic asset holdings of firms.  It is a circulating capital which flows and changes form as the firm pursues its goals  and performs,  its operation it is a financial lubricant or life stream for the firm  and maintains constant process  of circulation throughout firm.

          Current assets as the gross working capital, therefore, represent those assets that can be converted into cash within an accounting period. Current assets are constantly varying in the life of a firm i.e it changes from cash to inventions, to receivable and  then back to cash.  If a lot of funds are field down in the  form  of current assets, it will constitute a problem to the  management as there may  be little or no fund  for the other operational sectors.

          The purpose of the research is to assess the problem of working capital management in the development of manufacturing industries in Nigeria. In order to accomplish this study, Emenite Nigeria limited has been selected as a case organization.

1.2 STATEMENT OF PROBLEM

          In Nigeria today, some manufacturing industries are facing obsolescence, deterioration, pilferage, mishandling, high insurance and carring cost, idle funds and accounts receivable due to unnecessary accumulation of inventories. This study is arming at finding whether there is excessive working capital.

          Also, some manufacturing industries in Nigeria, are facing the problem of independence due  to liquidity problem.  This study is aiming at finding also whether there is in sufficient working capital available to manufacturing industries in Nigeria.

          Moreover, some are facing the problem of stagnation and sluggish rate of return on investment. This study is also aiming at finding whether there is more availability of working capital to undertake profitable investments.

1.3 OBJECTIVES OF THE STUDY

          In this study, the research in tend to achieve the following objective.

1. To discuss how working capital are managed in manufacturing industries in Nigeria.
2. To discuss the problems of working capital management in the manufacturing industries Nigeria.
3. To highlight the damages of poor management  of working capital in  manufacturing industries in Nigeria.
4. To find how inventory could controlled and  managed in the manufacturing industries in Nigeria.
5. To ascertain how indebtedness could be managed in  manufacturing industries in Nigeria.

1.4 SIGNIFICANCE OF THE STUDY

          This work will be very useful to the managers, directors, and financial analysts and students in financial schools. It will enable the managers in the manufacturing industries to know how to manage working capital properly.  Management, through this research could evaluate the profitability of working capital management that  is to know whether the revenue for gaited by way of working capital management are justifiable or otherwise. In other words, it will enable management to know whether working capital management have actually helped to redirect investment pattern,  bankruptcy, idle funds, unnecessary accumulation of inventories, stagnation, sluggish rate of return on investment, and short term maturing objections of the management towards  the development of manufacturing industries I Nigeria.

          This study will also enable management to compare the effect of the different areas  of working capital  management in  other t o identify those that are profitable  to  the  management  and manufacturing industries.

          This study will serve as a good reference material to students  of financial schools, who may wish to throw more light on this particular project topic.

1.5  SCOPE AND LIMITATIONS

          For the purpose  of this study, the researcher will restrict himself to  the management of working capital in the manufacturing industries  in Nigeria with particular reference to Ememite Nigeria Limited as a case study.

          Also the time allowed for this research  was too short considering the fact that the research covers a broad area.

1.6 DEFINITION OF TERMS

          ASSETS: According to the oxford advanced learner’s dictionary, “Asset” is defined as a thing of value, especially property, that a person, or a company owns, which can be used  or sold to pay debtors.

EQUITY CAPTIAL: This is the capital owned by the owner of a company.

GROSS WORKING CAPITAL: This is the totality of firms investment  in Current Assets such as  inventory, account receivable , short-term marketable securities and cash.

INVESTMENT: This refers to economic activities designed to increase, improve or maintain the productive quality of  the existing assets.

CAPITAL: A stock of money, possed by a person or firm which may  be invested from time to time in order to cam income which is intended to be diminished.

INDUSTRY: The Award illustrated Dictionary (C02A), defined “industry” as a branch of trade or manufacture, especially one employing much labour and capital, infact, manufacturing in general.

MANUFACTURE:  The same dictionary defined “manufacture as  making of articles by physical labour or machinery especially on large scale,  branch of an industry.

NET WORKING CAPITAL: This is the totality of firms  investment in current  assets les the totality of the firms current liabilities.

MABAGMENT: This is the application of human  and material resources  to achieve the objectives of an organization effectively and efficiently.

FINANCE: This deals with the ways business man’ investors, government, financial institutions, individuals and families handled money