Our Archives

Call 09159097300, or 09067754232 for any enquiries.

Project Topic:

THE IMPACT OF BUDGETING PLANNING AND CONTROL ON PRODUCTIVITY IN NORTHERN CABLE PROCESSING MANUFACTURING COMPANY (NOCACO), KADUNA

Project Information:

 Format: MS WORD ::   Chapters: 1-5 ::   Pages: 76 ::   Attributes: Data Analysis ::   2,761 people found this useful

Project Body:

ABSTRACT

This study examined the impact of budgeting planning and control on productivity in NOCACO. The objective of this study is to bring light to the need for effective and efficient budget plans and control, and to find out how and to which the extent budgeting serve as a means of planning and control to increase productivity. The methods used for the study is survey method, method of data collection is questionnaire and personal interview and the method of data analysis is likert scale is used based on mean statistic. The findings based on the data presented and analyzed, the researcher was able to identify that budgeting planning and control techniques are used for increase productivity in the dynamic profit and non profit making organization which is the study of this research work and its also observed that good budgeting system will help any organization to increase its productivity level. The researcher concludes that productivity must be planned before it can be controlled. Operation has been determined and analyze into expenditure cost so as to know how realistic would be contribution to project goals to make budget without planning. Lastly, the researcher recommended that the company should employ competent and intelligent staff which a lot of experience to facilitate the planning which go a long way in controlling productivity in the organization.

 

 

TABLE OF CONTENTS

Title page                                                                                                 i

Declaration                                                                                              ii

Approval Page                                                                                         iii

Dedication                                                                                                          iv

Acknowledgment                                                                                     v

Abstract                                                                                                    vi

Table of Contents                                                                                    vii

CHAPTER ONE: INTRODUCTION

  1. Background of the Study                                                              1
  2. Statement of the Problem                                                            3
  3. Objective of the Study                                                                            4
  4. Significance of the Study                                                              5
  5. Research Questions                                                                      5
  6. Scope of the Study                                                                         6
  7. Limitation of the Study                                                               
  8. Definition of Terms                                                                       6

 

CHAPTER TWO: LITERATURE REVIEW

2.0    Introduction                                                                                   9

2.1    Objectives of Budgeting                                                                10

2.2    Requirements of a Good Budgeting System                              12

2.3    Stages in Budget Preparation                                                     18

2.4    Flexible Budgeting                                                                        20

2.5    Zero Base Budgeting (ZBB)                                                                   21

2.6    Planning Programming Budgeting System (PPBS)                 24

2.7    Summary of the Literature Review                                            27

CHAPTER THREE: METHODOLOGY

3.1    Introduction                                                                                   28

3.2    Research Design                                                                            28

3.3    Area of Study                                                                                 29

3.4    Population of the Study                                                                29

3.5    Sample Size and Sampling Technique                                                29

3.6    Instrument of Data Collection                                                    30

3.7    Validation of the Instrument                                                      30

3.8    Reliability of Instrument                                                             31

3.9    Method of Data Collection                                                           31

3.10  Method of Data Analysis                                                              32

 

CHAPTER FOUR: DATA PRESENTATION AND ANALYSIS

4.1    Introduction                                                                                   34

4.2    Characteristics of Respondents                                                   34

4.3    Data Analysis                                                                                36

4.4    Summary of Findings                                                                             44

4.5    Discussion of Findings                                                                 45

CHAPTER FIVE: SUMMARY, CONCLUSION AND RECOMMENDATIONS

5.0    Introduction                                                                                   47

5.1    Summary                                                                                        47

5.2    Conclusion                                                                                               49

5.3    Recommendations                                                                         50

References                                                                                                53

Appendix                                                                                         54

 

CHAPTER ONE

INTRODUCTION

  1. Background of the Study

For any organization to operate meaningfully there has to be clear direction of where it is leading to or what it is aiming to achieve the standard of objectives and a means of monitoring derivatives from standard requires. These considerations can only be met through budgeting, planning as well as controlling.

A budget has been defined as a quantitative plan usually in monetary terms for the forth coming accounting year of the ensuring period. Budgeting planning/short term planning is the process of preparing detailed, short term (usually 1 year) plans for the function, activities and departments of the organization thus converting the long term co-operate plan into yearly action. Budgeting services as a very important tool for planning and control increase in productivity, in that budgeting aids planning for the future, if services as a control function through management by exception which is the assessment of performance for the purpose of controlling. It helps in co-coordinating of the work management in order to coordinate the activities of the organization.

  1. Statement of Problem

Generally, organization whether manufacturing or service, required good budgeting for increasing productivity. Budgeting as a tool for planning and controlling does increase productivity. This is the problem of qualified personnel that are required for the purpose of preparation implementation and execution of budgeting, areas of responsibility will be decided by management and also budgeting pressure is another problem. The study will therefore be focused on whether budgeting contribute towards increasing productivity in organization or not.

 

  1. Objectives of the Study

In view of the glaring problems as mentioned above the researchers main purpose of this study is to look carefully as the system of budgeting. This will enable the researcher to discover and bring to light any loop hole and lapses that may contribute on their little ways to aggregate private sector problem. Therefore, the objectives of the study are as follows:

  1. To examine the system of budgeting, planning and control in order to assess adequacy in productivity.
  2. To find out the extent budgeting serves in planning and increasing productivity.
  3. To examine facts about the organization and it mode of operation with regards to productivity.
  4. To identify the fact about operation and mode of operation.

 

  1. Significance of the Study

The significance of this study is essential on its benefit and contribution to individual and organization first and foremost. This study will serve as important objectives reference to top executive of organization who wants to achieve efficiency in production. It will also be significant to students who want to carry out further research on the area of study secondly, the finding of this study will be useful to both the organization and any other similar organization as well as general public in the field as it depicts the nature of problem associated with budgeting in this part of the country. Finally, this study will also cover the public as an essential requirement for the award of higher national diploma.

 

  1. Research Questions

The following questions were formulated to serve as parameter for the measurement of the objective earlier stated.

  1. How effective is budgeting, planning and control system in order to assess adequacy in productivity?
  2. What extent does budgeting serves in planning and increasing productivity?
  3. What are the fact about the operation and it mode of operation in NOCACO with regard to productivity?
  4. What are the facts about the operation and it mode of operation?

1.6    Scope of the Study

The study is restricted to cover the private sector, and suggest solution and recommendation on the topic of discussion which is budgeting as an effective tool for planning, control for increasing productivity.

1.7    Limitation of the Study

Like any other project, this study is not without limitations, the study emphasis being of the budgeting as an impact of budgeting planning and control on productivity in Northern Cable processing manufacturing company, Kaduna. Some of the difficulties encountered in carrying the study include:

  1. Inability of the researcher to obtain adequate and relevant data from the organization. Especially on sensitive economic issues that organization are secretive about.
  2. Financial constraint is another limitation, finance have bee inadequate such the researcher has been unable to move around and get data and material required for the study.
  3. Material such as company documents (official) which involves their operation and procedure of the organization activities have been inadequate due to lack of proper record keeping and equipped libraries.
  4. The uncompromising nature of most respondents especially to questionnaires and verbal question.
  5. Lack of time to carryout out the persona observation of the enterprise operations properly.
  6. Sometimes the statistical method used for data analysis might not be best available.

1.8    Definition of Terms

  • Budget: A budget has been defined as a quantitative plan usually in monetary terms of the forthcoming accounting year or for the ensuing period.
  • Budgeting: Budgeting planning is short term planning is the process of preparing detailed short term (usually one year) plan for the function activities and department for the organization, thus converting the long term corporate plan into yearly action.
  • Zero Base Budgeting (ZBB): Is formal defined by the (Chartered Institute of Management and Accounting) CIMA thus a method of budgeting whereby all activities is revaluated each time a budget is set.
  • Programme Planning and Budgeting System (PPBS): Is a radical approach to budgeting based programme which are grouping of activities with common objectives.
  • Budget Manual: The budgeting manual is an important aid to communication and instructional information manual not a list of agreed financial budget.
  • Flexible Budgeting: A flexible budget is one which is designed to dynast the budget cost level of suit the level of activities actually attained.
  • Planning: Planning can be defined as the establishment of activities and the formulation, evaluation and election of the polities strategies tactics and action required to achieve these objectives.
  • Strategic Planning: The formulation, evaluation and selection of strategies for the purpose of preparing a long term plan to attain objectives.
  • Tactical Planning: Is the process of preparing detailed short term (usually one year) plans for the functions, activities and department of the organization thus converting the log term corporation plan into action.
  • Control: Control is concern with the different use of resources to achieve a previously, determine objective or set of objective within a plan productivity (total factor basis).
  • Productivity: Productivity can be expressed on a total factor basis or on a partial factor basis productivity on a total factor basis.

Get The Complete Project »

Project Department:

MORE BUSINESS ADMINISTRATION FREE UNDERGRADUATE PROJECT TOPICS AND RESEARCH MATERIALS

Instantly Share this Project On Social Media:

CLOSELY RELATED BUSINESS ADMINISTRATION FREE UNDERGRADUATE PROJECT TOPICS AND RESEARCH MATERIALS

A CRITICAL STUDY ON THE EFFECTS OF JOB STRESS ON THE PERFORMANCE OF BANKERS IN NIGERIA (A CASE STUDY OF UNION BANK, CALABAR)

 Format: MS WORD ::   Chapters: 1-5 ::   Pages: 80 ::   Attributes: Questionnaire, Data Analysis,Abstract  ::   12175 engagements

ABSTRACT The study investigated and evaluated job stress and its effects on job performance among members of staff at Union Bank. The study sought to find out how work-related stress could affect the...Continue reading »

A STUDY ON THE IMPACT OF EMPLOYEE GRIEVANCES AND THE PERFORMANCE OF AN ORGANIZATION (A CASE STUDY OF NIGERIA BOTTLING COMPANY, LAGOS STATE)

 Format: MS WORD ::   Chapters: 1-5 ::   Pages: 80 ::   Attributes: Questionnaire, Data Analysis,Abstract  ::   7433 engagements

ABSTRACT Maintaining good employee-employer relationship is one criteria for an organization to succeed. If employees are not happy with management and their fellow colleagues at workplace, organizat...Continue reading »

AN APPRAISAL OF MATERIAL MANAGEMENT CONCEPT AS A STRATEGY FOR ACHIEVING HIGHER PRODUCTIVITY IN NIGERIAN BOTTLING COMPANY

 Format: MS WORD ::   Chapters: 1-5 ::   Pages: 78 ::   Attributes: Questionnaire, Data Analysis,Abstract

CHAPTER ONE INTRODUCTION 1.1 Background of the Study The Need for Appraisal of Material Management Concepts as a strategy for achieving higher productivity and to make up with the growing complexi...Continue reading »

ANALYZING PERFORMANCE APPRAISAL TECHNIQUES IN UNION BANK NIG PLC

 Format: MS WORD ::   Chapters: 1-5 ::   Pages: 71 ::   Attributes: Questionnaire, Data Analysis,Abstract

CHAPTER ONE INTRODUCTION 1.1 BACKGROUND OF THE STUDY In any evaluation of the condition necessary for the growth and survival of an organization, the role of performance appraisal is a strategic f...Continue reading »

ASSESSING BOOK-KEEPING PRACTICES OF SMALL AND MEDIUM SCALE ENTERPRISES IN OGOJA LOCAL GOVERNMENT AREA

 Format: MS WORD ::   Chapters: 1-5 ::   Pages: 67 ::   Attributes: Questionnaire, Data Analysis,Abstract  ::   4878 engagements

ABSTRACT Nigeria’s economy is characterized by a large number of micro enterprises, and in between lie small and medium enterprises (SMEs). The unique feature of most SMEs is that, they can be e...Continue reading »

ASSESSING THE EFFECT OF MATERIAL HANDLING ON THE PROFITABILITY OF A MANUFACTURING COMPANY

 Format: MS WORD ::   Chapters: 1-5 ::   Pages: 74 ::   Attributes: Questionnaire, Data Analysis,Abstract  ::   6882 engagements

CHAPTER ONE 1.1. Background of the Study Material Management, as practiced in business today, can be defined as “a confederacy of traditional material activities bound by a common idea. The id...Continue reading »

What are you looking for today?

TESTIMONIALS:

  • 1. Jayone from FPA said " I had a wonderful experience using UniProjectMaterials,though they did not deliver the material on time, but the content had good quality. I recommend UniProjectMaterials for any project research work.".
    Rating: Very Good
  • 2. Mugisha R from B.U, UGANDA said "Wow, this is great, your materials has helped me alot. Many blessings. I will inform my friends. Thanks. ".
    Rating: Very Good
  • 3. Nwachukwu Ruth Chinyerr from Michael okpara university of Agriculture,umudike said "I really appreciate this. Materials like this are good guides to writing a researchable project.".
    Rating: Good
  • 4. Ibrahim Salama from Kaduna said "Thanks You So Much Sir We Appreciate ".
    Rating: Excellent
  • 5. Ibrahim Salama from Kaduna said "Thanks You So Much Sir We Appreciate ".
    Rating: Excellent
  • 6. Mohammed A.B from Veterinary Laboratory, Zanzibar ,Tanzania said "You are doing good job to assists in research. God bless you.".
    Rating: Very Good

Paper Information

Format:ms word
Chapter:1-5
Pages:76
Attribute: Data Analysis
Price:₦3,000
Get The Complete Project »

Best Selling Projects

Our Archives