Our Archives

Call 08068929770 or 08122972656 for any enquiries.

Project Topic:

THE IMPACT OF COMMERCIAL BANK LENDING ON THE GROWTH OF MANUFACTURING SECTOR IN NIGERIA

Project Information:

 Format: MS WORD ::   Chapters: 1-5 ::   Pages: 56 ::   Attributes: Data Analysis,abstract, table of content, references ::   47 people found this useful

Project Body:

ABSTRACT

The research work examines the “effect of commercial bank lending on the growth of manufacturing sector”. Both primary and secondary sources were used in data collection and the data collected quantified into table’s percentage responses of the respondents, simple regression analysis used to test the hypothesis formulated. The result obtained from analysis of data shows that commercial banks lending to the manufacturing sub-sector impacts significantly on productivity performance, employment and contribution to gross domestic product (GDP) based the findings, it is recommended that commercial bank should increase the levels of credit and advances given to manufacturing sector maximize productivity and raise the production capacity of the economy.

CHAPTER ONE 1
INTRODUCTION 1
1.1 BACKGROUND 1
1.2 STATEMENT OF THE PROBLEM 3
1.3 OBJECTIVES OF THE STUDY 4
1.4 RESEARCH QUESTION 5
1.5 RESEARCH HYPOTHESIS 6
1.6 SIGNIFICANT OF THE STUDY 6
1.7 THE SCOPE AND LIMTATION OF THE STUDY 7
1.8 DEFINITION OF TERMS 9

CHAPTER TWO 11
LITERATURE REVIEW 11
2.0 INTRODUCTION 11
2.1 THE EFFECT OF COMMERCIAL BANK LENDING ON THE GROWTH OF MANUFACTURING SECTOR 11
2.2 BANK LENDING AS AN IMPORTANT FACTOR THAT DETERMINE MANUFACTURING 21
2.3 COMMERCIAL BANK FINANCE OF MANUFACTURING SUB-SECTOR OF THE ECONOMY 22
2.4 INTEREST RATE AND MANUFACTURING SUB-SECTOR IN NIGERIA 26
2.5 THE DERIVATION OF LENDING TO THE MANUFACTURING SUB-SECTOR IS VERY RISKY BY THE COMMERCIAL BANK 28
2.6 THE IMPACT OF FINANCE DEFICITS ON THE BANK IN SECTOR AND THE NIGERIA ECONOMY. 30
2.7 HIGH INTEREST RATE ON LENDING TO THE MANUFACTURING SECTOR 31

CHAPTER THREE 38
RESEARCH DESIGN AND METHODOLOGY 38
3.1 INTRODUCTION 38
3.2 RESEARCH DESIGN 38
3.3 POPULATION OF THE STUDY 39
3.4 SAMPLE SIZE AND SAMPLE TECHNIQUE 39
3.5 DATA COLLECTION 40
3.6 DATA ANALYSIS TECHNIQUES 40

CHAPTER FOUR 42
DATA PRESENTATION AND ANALYSIS 42
4.1 INTRODUCTION 42
4.2 PRESENTATION OF DATA 42
4.3 HYPOTHESIS TESTING 46
4.4 INTERPRETATION OF RESULT 48

CHAPTER FIVE 49
SUMMARY, CONCLUSION AND RECOMMENDATION 49
5.0 INTRODUCTION 49
5.1 SUMMARY OF FINDING 49
5.2 CONCLUSION 50
5.3 RECOMMENDATION 50
APPENDIX I 53

CHAPTER ONE
INTRODUCTION
1.1 BACKGROUND OF THE STUDY

The financial sector, especially the Commercial Bank is very important in the smooth functioning of the manufacturing sub-sector of the economic.
Lending which may be on short or medium basis is one of the services that Commercial banks do grant loans and advances to individuals, business organizations as well as manufacturing sub-sector in order to enable them carry on investment and development activity as a means of aiding their growth in particular or contributing towards the economic growth of the country in general/ Felicia, 2011.
Commercial banks plays crucial role in mobilization and financial intermediation to deficit economic unit.
Consequently, these roles make them an important phenomenon in economic growth and development.
In performing these roles, it must be realized that banks have the potential, scope and prospects for mobilizing financial resources and allocating them to manufacturing sector and in return increase productivity therefore, irrespective of the sources of the generation of income on the economic policy of the country commercial banks would be interested in giving out loans and advances to their customers bearing in mind the three principle guiding their operations which are profitability, liquidity and solvency (Adolphus 2011).
However, the commercial banks decision to lead out money are influence by a lot of factors such as the prevailing interest rate, the volume of deposits, the level of their domestic and foreign investment, banks liquidity ratio prestige and public recognition to menton but a few. Regardless of the fact that the manufacturing sub-sector is the life wire of economy of a country development.
This study discovered that these is a high bank lending rate to the manufacturing sub-sector of the economy of which these is not positive relationship between high cost of funds and capacity utilization.
It is also discovered that the firms due to high bank lending and cost of maintenance has attributed to low productivity.
Okporobie (1989) observes that Nigeria manufacturing sub-sector continue to decline despite the priority given to the sector. Available data shows that performance of commercial banks against this directive has been disappointing. He also observed that without the development of manufacturing sub-sector, the nations quest for industrialization will certainly remain at stake.

1.2 STATEMENT OF THE PROBLEM

The problem of bank lending to manufacturing sub-sector may not necessary be as a result of insufficient funds at the disposal of commercial bank. It has been discovered that the sector still suffers some problems and major constraints among which are:
Insufficient funds channel to the manufacturing industries in their for bank lending. Information gaps as to the range of commercial banks and scope of services available in the financial sector. High bank lending /inflated interest rate on the manufacturing sub-sector.
The volume of deposit. Banks liquidity ratio

1.3 OBJECTIVES OF THE STUDY

1. To examine the effect of commercial bank lending on the growth of manufacturing sub-sector in Nigeria
2. To evaluate the impact of loans disbursed by the commercial banks to the manufacturing sector
3. To examine the extent to which commercial bank loans has gone in boasting the manufacturing productivity in Nigeria
4. To access the extent to which manufacturing sector performance enhances employment and economic productivity
5. To understand the role of commercial bank lending on the growth of manufacturing sub-sector in Nigeria

1.4 RESEARCH QUESTION

These are specific question/investigation which is asked in order for the researched to know the problem encountered by the money deposit banks and the Nigeria manufacturing sub-sector, This proffer solution to the problems.
1. Do the commercial bank lending have any significant effect on the growth of manufacturing sub-sector in Nigeria.
2. Has the loan disbursed by the commercial bank made any impact to the manufacturing sector.
3. Has the manufacturing productivity been boasted by the loans from the commercial banks.
4. Do the money deposit banks play any role on the growth of manufacturing sector in Nigeria
5. Do the loans/advance granted manufacturing sector impact on employment
6. Has the loans received by manufacturing industry enhance productivity and growth.

1.5 RESEARCH HYPOTHESIS

Ho: Commercial bank lending has a significant sector
Hi: Commercial bank lending has no significant effect on the performance of the manufacturing sector. T here is no significant relationship between commercial banks loans and advance and capacity utilized of the manufacturing sector.

1.6 SIGNIFICANT OF THE STUDY

The study will high light the relevance or the role of commercial bank lending on the performance of manufacturing sector in Nigeria.
It will give information on the possible areas for improvement.
Furthermore, the study will help commercial bank to access and appraise their role in their lending to the manufacturing sector in Nigeria.
The significance of this study could be seen from the effective mobilization of loans/advances to the manufacturing sector by commercial bank.
It would be necessary for the banking sector by commercial bank.
It would be necessary for the banking sector vis – a vis the commercial bank to be adequately capitalized so as to play its role well in financial intermediation. It will equally serve as a guideline to future work in the near future. This research will contribute to knowledge and act as the hero for further research.

1.7 THE SCOPE AND LIMITATION OF THE STUDY

This study looks into the effect of commercial bank lending on the growth of the manufacturing sector in Nigeria over the years from 2005 – 2010. This was when the policy of consolidation was introduced by Charles Soludo the enhance or increase the lending rate of commercial banks to the manufacturing sectors.
The limitation of this research is generally anticipated to include these of data collection and inaccessibility to relevant data for analysis and execution of the problems.
There are also the problems of time constraint, communication mans and finance which may set limits to analysis of the data to be collected.
However, in the process of carrying out the study, measures and available opportunities will be explored to enhance the success of this research work.
Also change in technology may affect the accuracy of the results generated.

 


Get The Complete Project »

Project Department:

MORE ACCOUNTING FREE UNDERGRADUATE PROJECT TOPICS AND RESEARCH MATERIALS

Instantly Share this Project On Social Media:

CLOSELY RELATED ACCOUNTING FREE UNDERGRADUATE PROJECT TOPICS AND RESEARCH MATERIALS

AN APPRAISAL OF THE IMPLICATION OF ELECTRONIC BANKING IN NIGERIA BANKS (A CASE STUDY OF ACCESS BANK)

 Format: MS WORD ::   Chapters: 1-5 ::   Pages: 67 ::   Attributes: Secondary data, Data Analysis,Abstract  ::   1816 engagements

CHAPTER TWO REVIEW OF RELATED LITERATURE Electronic banking in Nigeria has overtime been viewed by many especially economists as having a lot of implications on the economy of Nigeria and especially...Continue reading »

A CRITICAL ANALYSIS OF THE USE OF FINANCIAL STATEMENTS IN ASSESSING THE PERFORMANCE OF AN ORGANIZATION (A CASE STUDY OF FIRST BANK NIGERIA)

 Format: MS WORD ::   Chapters: 1-5 ::   Pages: 75 ::   Attributes: Questionnaire, Data Analysis, Abstract  ::   1203 engagements

ABSTRACT The study was carried out to analyse how an organization performs making use of the financial statements with First Bank of Nigeria Plc serving as the case study. the study disclosed that th...Continue reading »

AN EVALUATION OF THE PERFORMANCE OF NIGERIAN STOCK EXCHANGE IN THE ECONOMIC DEVELOPMENT OF NIGERIA ( A CASE STUDY OF NIGERIAN STOCK EXCHANGE)

 Format: MS WORD ::   Chapters: 1-5 ::   Pages: 78 ::   Attributes: Questionnaire, Data Analysis,Abstract  ::   803 engagements

HISTORICAL BACKGROUND OF THE NIGERIA STOCK EXCHANGE IN THE ECONOMIC DEVELOPMENT OF NIGERIAN. The nigeria stock excahnge denoted by NSE is a government establishment where stocks are traded on a daill...Continue reading »

APPLICATION OF BUDGETS AND BUDGETARY CONTROL MEASURES IN A NON-PROFIT ORGANIZATION: A CASE STUDY OF APOSTOLIC CHURCH, DELTA

 Format: MS WORD ::   Chapters: 1-5 ::   Pages: 76 ::   Attributes: Questionnaire, Data Analysis,Abstract  ::   755 engagements

2.1 CONCEPTUAL FRAMEWORK A budget is can be defined by accountants as “a planned outcome to be generated and for the expenditure to ensure during that period and the capital to be employed to a...Continue reading »

ASSESSING BOOK-KEEPING PRACTICES OF SMALL AND MEDIUM SCALE ENTERPRISES IN CALABAR LOCAL GOVERNMENT AREA

 Format: MS WORD ::   Chapters: 1-5 ::   Pages: 69 ::   Attributes: Questionnaire, Data Analysis,Abstract  ::   692 engagements

ABSTRACT The economy of Nigeria cannot function properly or thrive without the micro, small and medium scale enterprises (SMEs). These small scale enterprises cannot function properly if they are not ...Continue reading »

ASSESSMENT OF ADEQUATE RISK RECOGNITION AND MANAGEMENT IN NIGERIAN INSURANCE COMPANIES (A CASE STUDY OF UNION ASSURANCE COMPANY, UYO)

 Format: MS WORD ::   Chapters: 1-5 ::   Pages: 86 ::   Attributes: Questionnaire, Data Analysis  ::   624 engagements

THE CONCEPT OF RISK Risk has been the subject of study by different scholars over the years with several meaning and definitions. But the most accepted definitions are that of J.E Banister and P.A Baw...Continue reading »

What are you looking for today?

TESTIMONIALS:

  • 1. Mohammad I. Musa from UNIMAID said "Thank you guys for your honesty, i will introduce my friends to uniprojectmaterials.com, May God bless your team....".
    Rating: Good
  • 2. Ademola Ayodele from FUTMINA said "i like the confidence you guys installed in me. i never knew there are still some good people in Nigeria; my job was delivered on time as promised..your help desk service is just ok. i have friends to recommend you guys to in January. thank you God bless you. ".
    Rating: Excellent
  • 3. Rita Eze from abia state university said "thank you so much for your sincerity; i will tell my friends about you guys.".
    Rating: Very Good
  • 4. JULIET from UNIMAID said "I THANK YOU GUYS FOR BEING HONEST.....I WILL TELL MY FRIENDS ABOUT YOU GUYS. THANKX SO MUCH".
    Rating: Excellent
  • 5. Lilian Terdoo from BSU said "i have nothing to say but thanx for being honest. i appreciate u guys...".
    Rating: Very Good
  • 6. Demien Johnson from UNN said "Uniprojectmaterials is a blessing to researchers. my job was eased up by you guys. your jobs have good quality and was delivered on time to me. Thanks a million times".
    Rating: Very Good

Paper Information

Format:ms word
Chapter:1-5
Pages:56
Attribute:Data Analysis,abstract, table of content, references
Price:₦3,000
Get The Complete Project »

Best Selling Projects

Our Archives